Induction Heater IH 070

to heat smaller to medium-sized work pieces up to 80 kg

ih70

simatherm Induction Heater IH 070

The IH 070 is intended to heat smaller to medium-sized work pieces up to 80 kg. The IH 070 comes equipped with 3 yokes and can be outfitted with an optional swivel arm.

Due to the external induction coil the device exemplifies efficiency. The performance can be adjusted to four different levels according to the user’s requirements.

Technical data

Criteria

Designation

Designation

IH 070/230 V, 50 Hz
IH 070/110 V, 60 Hz

Workpiece
- Maximum weight
- Bore diameter


80 kg
20–400 mm

Temperature control
- Range
- Magnetic probe
- Accuracy (electronics)


0–250°C
Type K
± 3°C

Time control
- Range
- Accuracy


0–60 minutes
± 0.01 seconds

Maximum temperature

400°C

Thermometer mode

Yes

Bearing temperature mode

Yes

Power reduction

4 steps / 20-40-60-80 %

Automatic demagnetisation
Residual magnetism

Yes
< 2 A/cm

Suitability for sealed bearings

Yes

Suitability for pre-greased bearings

Yes

Error guiding codes

Yes

Thermal overload protection

Yes

Maximum magnetic flux

1.5 T

Control panel

Keyboard with LED display

Size of the operating area (WxH)

145 x 205 mm

Coil diameter

115 mm

Dimensions (WxDxH)

420 x 280 x 345 mm

Overall weight including yokes

35 kg

Maximum power consumption

3.7 / 2.2 kVA

Standard yokes

14 x 14 x 275 mm
28 x 28 x 275 mm
55 x 55 x 275 mm

Core cross section

55 x 55 mm

Yoke storage

Yes, internal

Sliding arm

-

Swivel arm

Optional

Cooling fan

-

Housing material

Aluminium

Flyers

Downloads:

Flyer IH 070 (pdf - 461 KB)